Universal mounting kit for lateral axle stands WRC-type. To be welded and cut, once placed. Adapted to the large bodies or originals kit; The kit contains 4 tubes in mechanicals tube, cold drawn from 40x2,5mm, length 250mm, 4 drilled from 41 mm hole plates.
shipping within 24/48h
Warning: Last items in stock!
Universal mounting kit of 4 reinforcements/ Supports /lateral axle stands WRC-type. To be welded and cut once placed. Adapted to the large bodies or originals bodies kits.
This kt contains :
- 4 tubes, thickness 40mmx2,5 and length 250mm, in mechanical steel cold drawn..
- 4 plates of 80x80mm drilled by a bore of 41mm for the low part of the body car.
Some advices :
- Plates must be welded to the tubes.
- For the front, provide to weld to the counterplate arch (but not to the arch), or to make a bracket, or a inner counterplate if it is not near this counterplate.
- The front supports must be set as far forward as to avoid being too close of the tipping point
- The tubes must be cut flush the car body to avoid to be used as attachment point.
- Depending on the inclination of the car body, it can be necessary to enlarge the bore of the plates vertically